Applied Heat Recovery
Light Industrial / Commercial Boiler Economizer
See this new product at booth #709
• Robust Welded Heat Exchanger: Ensures long-lasting reliability and leak-free operation.
• Tube Support System: Fully supported tubes eliminating stress on the heat exchanger.
• Insulated Headers: Equipped with insulated and encased headers for optimal efficiency.
• High-Quality Materials: Standard 304SS tubes. Other materials available upon request.
• Efficient Fin Design: Standard Stainless Steel fins suitable for natural gas and #2 oil operation. Other configurations available upon request.
• Insulated Casing: Carbon steel outer casing internally lined by mineral fiber insulation. Optional carbon steel or stainless steel inner casing available.
• Versatile Flange Options: Standard rectangular gas flanges with optional plate adapters to provide different configurations to match boiler and/or connecting ducting.
Atlas Copco Specialty Rental
SCR-WT
See this new product at booth #907
The new SCR skid for our fleet of watertube boilers is a major improvement on our previous design in terms of footprint and serviceability. The smaller footprint makes it more rental-friendly while the simpler design allows for quicker service, minimizing downtime on job sites. Additionally, the unit comes with multiple reagent options and a vast array of sensors and controls that go beyond the regulatory requirements. The system can be set up for remote monitoring and control and can send alarms and messages to operators to ensure maximum visibility of their steam system.
Autoflame Engineering
Mk8 Flame Safeguard
See this new product at booth #507
The Mk8 Flame Safeguard controller can be upgraded to a full Parallel Positioning controller simply through a software code, servomotors, and a load sensor. The physical controller remains in-place, the existing mod motor and linkage is swapped out with individual servomotors, and a load sensor is installed; the user now has a fully modulating parallel positioning system.
CERTUSS America
UMX ULTRA LOW NOX
See this new product at booth #415
Smallest footprint incl. all gas train, steam separator, ultra low NOx, feed water and pre-pressure pump and sliding gate valve! All included and skidded
- Full modulation between 20-100%
- In less than 5 minutes from cold start to full steam pressure
- Full automated operation
- Highest gas to steam efficiency
- All boiler controls via touch panel
- One view control from afar
Clark-Reliance
Eye-Hye® SmartLevel™ Remote Water Level Indication System
See this new product at booth #504
The World's smartest boiler water level indication system receives even more features!
The Eye-Hye® SmartLevel™ Remote Water Level Indication System is the only boiler remote level indicator that offers an onboard diagnostic system that produces a blue blowdown light to notify the operator that a probe needs cleaned. This year we introduce the Smart Relay module, a 24VDC power supply option with built-in logic, and a dimming feature standard on all new SmartLevel remote LED indicators.
With the modular nature of our design, all of these new features can be added to any new or existing SmartLevel control unit by simply plugging it in!
Equipment Group International
TES Mini
See this new product at booth #731
This package provides a true torque-controlled tool designed for servicing boilers in service where compressors cannot be used but can also be used in boiler production for storing tube expanding counts, allowing a manufacturer to provide the data to a client.
Fabtek
Stealth Series Boiler Feed Units
See this new product at booth #1103
Budget friendly all stainless steel floor mounted boiler feed units.
Allows for a lower price point boiler feed system with all stainless steel construction.
Fireye, Inc.
BurnerLogiX® Flame Safeguard Control
See this new product at booth #1010
Introducing a revised BurnerLogiX flame safeguard with two new features:
• VALVE PROVING
Valve proving is done to ensure that neither main fuel valves are leaking. In the past, block and vent valves were required as were long vent pipe runs to atmosphere. With BurnerLogiX valve proving, cost, convenience and safety are easily accommodated.
• LOW GAS PRESSURE Input
This additional new input allows the control to monitor gas pressure and can alarm and/or lockout based on setpoints being exceeded.
Frederick Cowan Products by ICI
ULC 96-19F
See this new product at booth #410
The ULC 96-19F 4 Joule PowerArc Power Pack brings our long standing 4 Joule 96-19 High Energy Spark Ignition module to the Canadian marketplace.
Groupe Simoneau
E-Volta
See this new product at booth #815
Simoneau is redefining electrical boiler innovation, increasing boiler pressure in steam and developing efficient hot water systems with added redundancy. Pushing the limits of industrial electric systems, electrification solutions, and hydroelectric engineering is what we do best. Our experienced, multidisciplinary team has come up with an electric boiler solution that incorporates the latest technologies and adheres to the industry's strictest manufacturing standards: the eVolta®, the electric boiler of the future.
Whether you require a dependable energy supply for an entire industrial sector or access to industrial-grade heat, our eVolta® system offers maximized energy efficiency while actively helping you reduce your carbon footprint. Thanks to its dual energy capacity, allowing you for example to leverage your building's energy source for the ramping-up process or overnight standby maintenance, the eVolta® is the versatile solution that can deftly handle today’s industrial steam and heating needs.
Heyl Brothers
Testomat Limit
See this new product at booth #916
Experience reliable water analysis with the Testomat® Limit, a cutting-edge online instrument designed for the precise measurement of low levels of total water hardness to protect your boiler.
The Testomat® Limit offers a customizable sample interval, touch screen display and immediate notifications through alarms are activated if water hardness surpasses defined limits.
This analyzer seamlessly integrates with other systems, transmitting results directly to a PLC, softener, or filters for automatic corrective actions.
Johnston Boiler Company
Eagle Claw Burner
See this new product at booth #300
Johnston Boiler's Eagle Claw Burner is designed to deliver <9ppm NOx when firing natural gas with reliable performance and minimal maintenance in BTU ranges from 24 MMbtu/hr to 100 MMbtu/hr. 100% manufactured with the USA this burner offers the quality synonymous with the Johnston Boiler name.
Nationwide Boiler Inc.
Eagle Eye Remote Monitoring System
See this new product at booth #700
The Eagle Eye Remote Monitoring System is a safe, secure, and innovative software / hardware package that can be incorporated in new or retrofitted control systems for steam plant equipment (burners, deaerators, and water treatment systems). The Eagle Eye enables operators and technicians to view real-time data and gain critical insights into the operational efficiencies / deficiencies of their system. Facility staff, operators, and engineers can connect remotely from any electronic device (computer, tablet, or cell phone) to view and evaluate the current status and performance of their steam plant equipment. The Eagle Eye can also be setup to alert operators, via any method of communication, of issues that need immediate attention.
Oilon US Inc
Worlds 1st 2.5 PPM Ultra-Low NOx UL approved burner.
See this new product at booth #915
The traditional 9-5ppm ultra-low NOx burners depend heavily on mesh, filters, and FGR that come with a significant amount of cost, maintenance, and down time to keep the burners operational. Also, this type of technology could only guarantee sub 5 ppm NOx. With Oilon's new and improved 2nd generation LN30 combustion head technology we can now guarantee 2.5ppm NOx levels and also maintain a standard 5-year warranty on the combustion head and UL listing.
Power Flame Incorporated
HELOX
See this new product at booth #500
HELOX burner has an innovative design that allows operation for low NOx of <30 ppm, and CO of <30ppm without using flue gas recirculation (FGR). The Helox Burner boasts an emissions turn down of 6:1 and a fuel turn down of 10:1 across the firing range. It utilizes an adjustable venturi within the burner assembly and is equipped with an auto changeover of fuel from gas to liquid without requiring any disassembly. The burner also uses staged firing design, premix zone and fuel rich zones. The liquid fuel nozzle is designed to operate using low pressure atomization via a regenerative blower as opposed to medium/high pressure compressors and a reduced motor horsepower for the blower wheel.
Rogue Combustion
S-Series Burners
See this new product at booth #629
ClearSign and Rogue have revolutionized combustion technology to address the pressing need for cleaner, more efficient boiler burners. Our 2.5 PPM NOx (NZN) technology has paved the way for the S series burner line, featuring SUB-5 PPM (S5) and SUB-9 PPM NOx (S9) burners.
Here’s everything you need to know:
Ultra-Low NOx Performance: The S series burners achieve remarkable emissions levels, ensuring compliance with rigorous environmental regulations. With SUB-5 PPM and SUB-9 PPM NOx guarantees, we’re setting new standards for clean combustion.
Value Engineered Design: Our engineers have simplified the burner design without compromising performance. In addition to their elegant design and easy-to-maintain form factors, the S series offers efficient installation and maintenance options.
TC Wilson
Combination Beading Expander
See this new product at booth #1111
This newly developed tool can be used to expand and bead tube simultaneously for 1 1/2" X-ID tubes of various materials. It is an additional tool to our standard 3", 2 1/2" and 2" Combination Beading Expander
Viking Vessel Services, LLC
Tuff Tube Transition
See this new product at booth #930
Tube Failures are a critical ailment that bring the operations of a power plant to a catastrophic, grinding halt. Viking Vessel Services saw the need to bridge the gap of inefficiency with these crippling and devastating repairs within the industry, so we engineered a process, along with an ASME Section I part, the Tuff Tube Transition, to deliver quality, efficiency and less down time, up to 80% quicker repairs on tube to tube and tube to header repairs! The Tuff Tube Transition or 'TTT' not only reduces thermal expansion for a stronger, more secure tube-to-tube and tube-to-header connection, it also eradicates conventional open-root butt welds, eliminating purging and guaranteeing no oxidation occurs. All this and the repair with a TTT can be done in a fraction of the time of a conventional tube repair, ensuring the power plant huge savings in both outage time and budget. Viking Vessel Services has developed a sleeve type header connection (Tuff Tube Transition or ‘TTT’) for the repair of tubes. Our TTPS is designed and engineered to eliminate costly and time consuming open-root butt welds. Also eliminates the need for purging and RT - FOREVER! Up to 48-60% stronger than conventional repair method.